SEW-Eurodrive MOVIPRO Ethernet/IP - Page 58

6
Configuration and startup of EtherNet/IP™
Project planning examples
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
58
Name Data structure
WriteParameterResponse SEW_Parameter_Channel
WriteParameterStart BOOL
3. To be able to perform the write request, adapt the program of the PLC as follows:
18014399382579339
4. Click the button in the MSG block.
ð The following window is displayed.
2
12
[1]
[2]
[3]
9007200845377675
5. Select the setting "CIP Generic" from the drop-down list [2].
6. Make the following settings in the specified sequence:
ð The drop-down list [3] is automatically set to "SetAttributeSingle" after the
entries are applied.
Window element Setting/value
Source Element WriteParameterRequest.Index
Source Length (Bytes) 12
Destination WriteParameterResponse.Index
Service Code (Hex) 10
Class (Hex) 7
Instance 2
Attribute (Hex) 4
16998413/EN – 12/2016