SEW-Eurodrive MOVIPRO Ethernet/IP - Page 59

6
Configuration and startup of EtherNet/IP™
Project planning examples
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
59
7. Open the tab [1].
16761643403
8. Click the button [2].
ð A module manager is displayed.
9. Via "I/O Configuration" > "Ethernet", select the target device with which you want
to establish communication.
10. Do not activate the check box [3]. Both the PLC and the device only allow a limited
number of connections.
16998413/EN – 12/2016