SEW-Eurodrive MOVIPRO Ethernet/IP - Page 63

6
Configuration and startup of EtherNet/IP™
Project planning examples
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
63
4. Click the button in the MSG block.
ð The following window is displayed.
[1]
15215569931
5. Make the following settings in the specified sequence:
Window element Setting/value
Source Element ReadParameter_Request.Index
Source Length (Bytes) 12
Destination Element ReadParameter_Response.Index
Service Code (Hex) 34
Class (Hex) 65
Instance 0
Attribute (Hex) 0
16998413/EN – 12/2016