SEW-Eurodrive MOVIPRO Ethernet/IP - Page 67

6
Configuration and startup of EtherNet/IP™
Project planning examples
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
67
Name Data structure
WriteParameter_Request SEW_ParameterChannel
WriteParameter_Data DINT
WriteParameter MESSAGE
3. To be able to perform the write request, adapt the program of the PLC as follows:
9007214470335883
4. Click the button in the MSG block.
ð The following window is displayed.
[1]
15215597323
5. Make the following settings in the specified sequence.
Window element Setting/value
Source Element WriteParameter_Request.Index
Source Length (Bytes) 12
Destination Element WriteParameter_Response.Index
Service Code (Hex) 35
Class (Hex) 65
Instance 0
Attribute (Hex) 0
16998413/EN – 12/2016