SEW-Eurodrive MOVIPRO Ethernet/IP - Page 83

7
Ethernet Industrial Protocol (EtherNet/IP™)
CIP object directory
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
83
7.4.7 TCP/IP interface object
• Allows for configuration of the IP parameters via EtherNet/IP™.
• Class code: F5
hex
Class
Attrib-
ute
Ac-
cess
Name Data type Default value
hex
Description
1 Get Revision UINT 0001 Revision 1
2 Get Max Instance UINT 0001 Maximum instance
3 Get
Number of
Instances
UINT 0001
The device has one TCP/IP inter-
face.
Instance 1
The following table provides an overview of instance 1 of the TCP/IP interface object:
Attrib-
ute
Ac-
cess
Name Data type Default value
hex
Description
1 Get Status DWORD 00000001 Valid configuration
2 Get
Configuration
Capability
DWORD 00000014
The interface configuration attribute
(5) is writable. The DHCP can be
used for configuration.
3 Set
Configuration
Control
DWORD 00000002
• Value 0: The device uses IP para-
meters saved during boot-up.
• Value 1: The device awaits its IP
configuration via DHCP during
boot-up.
4 Get
Physical Link
Object
STRUCT of –
Reference to the EtherNet link ob-
ject (class code 0xF6) as sublayer.Path Size UINT 0002
Path Padded EPATH 20 F6 24 01
5 Set
Interface
Configuration
STRUCT of – –
IP Address UDINT – Current IP address
Network Mask UDINT – Current subnetwork mask
Gateway Address UDINT – Currently set standard gateway
Name Server UDINT 00000000 DNS is not supported.
Name Server 2 UDINT 00000000 DNS is not supported.
Domain Name STRING sew.de –
6 Get Host Name STRING – Not used
Supported services
The following table shows the services supported by the TCP/IP interface object:
Service Code
hex
Service Name class Instance
01 Get_Attributes_All X –
0E Get_Attribute_Single X X
10 Set_Attribute_Single – X
16998413/EN – 12/2016