SICK S300

Chapter 4 Operating instructions
S300
50 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8010948/YY96/2016-02-17
Subject to change without notice
Configurable functions
Static 1-of-n sampling
With 1-of-n sampling you use the single connections of the control input pairs. In this way
t
he S300 Advanced provides four and the S300 Professional/Expert six input connections.
 Using external inputs, maximally ten input connections can be used (e.g. those of a Flexi
Soft safety controller, see section 4.5 “Inputs” on page 37).
 All connections must be connected!
 One connection must be 1!
 Only one connection is ever allowed to be 1!
A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 E.g. case
1 0 0 0 0 0 0 0 0 0 1
0 1 0 0 0 0 0 0 0 0 2
0 0 1 0 0 0 0 0 0 0 3
0 0 0 1 0 0 0 0 0 0 4
0 0 0 0 1 0 0 0 0 0 5
0 0 0 0 0 1 0 0 0 0 6
0 0 0 0 0 0 1 0 0 0 7
0 0 0 0 0 0 0 1 0 0 8
0 0 0 0 0 0 0 0 1 0 9
0 0 0 0 0 0 0 0 0 1 10
1 1 0 0 0 0 0 0 0 0 Error
0 0 0 1 1 0 0 0 0 0 Error
0 0 0 0 0 0 0 0 0 0 Error
and all other combinations Error
Notes
Tab.
19
:
Truth table for
16of6n sampling