process control integration of the device, this interface can also be used for communication with DIGSI and for
interrelay communication via GOOSE.
The GOOSE function can be disabled in a device parameter. For more information, please refer to Section
2.1.2.2 Setting Notes.
You can use an optical or electrical EN100-Module with 2 ports for IEC 61850 and/or DNP 3.0 TCP and/or
PROFINET and/or IEC 60870-5-104 in the 7SC80 Feeder Protection and Recloser Controller.
Information List
No. Information Type of
Informa-
tion
Comments
009.0100 Failure Module IntSP Failure EN100 Module
009.0101 Fail Ch1 IntSP Failure EN100 Link Channel 1 (Ch1)
009.0102 Fail Ch2 IntSP Failure EN100 Link Channel 2 (Ch2)
2.1.7.2
Functions
2.1 General
70 SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017
To Next Page
Loading...
