B2Q191 Logging printer
245
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
7 Paper monitoring contact –> Paper end
If the paper monitoring contact is activated, the control unit indi-
cates a fault 'Paper end'. The printer can then still print out
approx. 200 lines. Thereafter the printing process is discontinued.
When a new paper roll is inserted (paper contact inactive) and the
'Acknowledge' key is pressed, the fault signal is cancelled.
8 Connection TTL port for modem card (FSK/PSK) (14-wire, 1m) for details –>
see page 242
9 Printer control card K3L080 for details –> see chapter 56.6
Blocking of motor
– When the motor is blocked the control unit signals the fault ’Motor blocked’
(according to the type of control unit).
56.6 Printer control K3L080 (pre-assembled)
z Included with the B2Q191
z Mounted in printer card locating frame
z Contains the software for printer control
z Card format 100 mm x 185 mm
1, 2
3
4
5
6
7
8
9
10
11
12
13
14
D1
S1
X11
A2
X13
A3
K3
X12
S2
F1
K1
K2
MCU
open
1
8
1
2
1
6
1
5
H2
H1
X14
A1
Legend:
1 Programming switch «S1»: Choice –> baud rate, communication parameters
and character set
Î Set ’Printer type 1’ in AlgoWorks
Default value printer communication parameter AlgoWorks:
– 8 data bits / no parity / 1 stop bit
– baud rate 9600
To Next Page
Loading...
