4
03.04 Program operating area
4.1 Directories
4
After pressing the 8th softkey, the expansion key, you will be
presented with another softkey bar containing the softkeys CLP and
Save Info.
CLP Calls up the contents of the clipboard
Save Info Displays the NC memory
4.1.1 Workpiece overview
Function
After you select the WPD softkey the Workpiece Overview working
window is displayed.. All of the existing workpieces are listed with
their name, type, date and release.
Other information
The following softkeys are available:
New Creates a new workpiece directory
Copy Copies the selected workpiece to the clipboard.
Paste Inserts a workpiece which was previously copied to
the clipboard
Delete Deletes the selected workpiece (after a safety prompt)
Renaming Allows the currently selected workpiece to be
renamed.
Enable The selected file receives/loses the enable identifier.
This is indicated with an "X"; the program can be
worked through.
Selection Workpiece Selection working window
Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition 4-47
To Next Page
Loading...