4
03.04 Program operating area
4.2 Editor in normal mode
4
4.1.6 Memory information
Function
This function enables you to have the entire available memory
displayed.
Operating sequence
In the Standard Directories Overview working window the softkey
Mem Info has been selected:
The following working window opens:
Memory Info working window
4.2 Editor in normal mode
Function
You can make alphanumeric changes in the editor. The standard
operator functions of an editor are available.
The selected program can also be opened when active. Blocks which
are not disabled, i.e. ones which have not yet been interpreted, can
be changed online.
If the selected program has already been opened by another
application then the following message will appear when an attempt is
made to open it again:
"This program has already been opened by a different application".
The following message appears if an attempt is made to edit a
disabled block: "No write access to the data".
Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition 4-53
To Next Page
Loading...