0
Preface 03.04
Intended use
0
Notice
This warning means that an undesirable result or an undesirable state
can occur if the information is ignored.
Reference notes
You will find this symbol wherever further information on a particular
topic can be looked up in specialist literature.
A complete list of available literature is included in the Appendix of
this Operator's Guide.
Principle
Your SIEMENS 840D, 810D is designed using state-of-the-art
technology in conformity with recognized safety regulations,
standards and specifications.
Supplementary devices
The applications of SIEMENS controls can be expanded by adding
special additional devices, equipment and expansions supplied by
SIEMENS.
Personnel Only properly trained, authorized and reliable personnel must be
allowed to use this equipment. No-one without the necessary training
must be allowed to operate the control, even temporarily.
The areas of responsibility assigned to personnel involved in setting
up, operating and maintaining the equipment must be clearly
specified and their compliance verified.
Procedure Before the control is started up, personnel responsible for its
operation must have read and understood the Operator's Guides. The
company using this equipment is also obliged to carry out
continuous monitoring of the overall technical condition of the
equipment (with a view to identifying externally visible defects and
damage as well as changes in the operating behavior of the control).
Siemens AG, 2004. All rights reserved.
viii SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
To Next Page
Loading...