1PosInc/Analog
4.6 Functions of the 1PosInc/Analog
ET 200S Positioning
Operating Instructions, 05/2007, A5E00124871-04
125
4.6 Functions of the 1PosInc/Analog
4.6.1 Overview of the Functions
Overview
The 1PosInc/Analog offers you the following functions for moving your axis:
● Stop
● Search for Reference
● Inching
● Absolute Positioning
● Relative Positioning
In addition to the different types of motion, the 1PosInc/Analog also offers functions for:
● Setting of Actual Value
● Change Switch-Off Difference
● Change Switchover Difference
● Changing the Voltage for Rapid Feed
● Changing the Voltage for Creep Feed
● Changing the acceleration (T
acc
)
● Changing the deceleration (T
dec
)
● Reference Signal Evaluation
● Latch Function
● Setting the Monitoring of the Direction of Rotation
● Display Current Values
● Error Detection/Diagnostics
● Behavior at CPU-Master-STOP
To Next Page
Loading...
Need help?
General
