Siemens SIMATIC ET 200S - Figure 3-9 Sequence of Execution of the Search for Reference

1PosInc/Digital
3.6 Functions of the 1PosInc/Digital
ET 200S Positioning
72 Operating Instructions, 05/2007, A5E00124871-04
After the reference signal has been traversed, the axis is synchronized. The 1PosInc/Digital
sets the feedback signal SYNC = 1 and assigns the reference point coordinates to the actual
value.
63(('
',5B3
326B(55
326B'21(
326B$&.
',5B0
6<1&
67$57
5DSLGIHHG
&UHHSIHHG
5HGXFLQJFDP =HURPDUN
3DWK
Figure 3-9 Sequence of Execution of the Search for Reference