Siemens SIMATIC ET 200S - Page 180

1PosInc/Analog
4.8 Parameter List
ET 200S Positioning
180 Operating Instructions, 05/2007, A5E00124871-04
Parameters Meaning Value range Default setting
Acceleration T
acc
in ms Time required for a change in voltage
via a ramp from 0 V to10 V.
At 0 ms acceleration is without a
ramp.
0 - 65535 10000
Deceleration T
dec
in ms Time required for a change in voltage
via a ramp from 10 V to 0 V.
At 0 ms deceleration is without a
ramp.
0 - 65535 10000