1STEP 5V/204kHz
2.9 Technical specifications
ET 200S Positioning
52 Operating Instructions, 05/2007, A5E00124871-04
Technical data 1STEP5V/204khZ
Connection to the power unit (data to the outputs)
The cables to the power unit must be
twisted in pairs and shielded.
Max. 100 m
Differential signals for pulses and direction To RS 422
Status, interrupts, diagnostics
Digital input status display for STOP or
pulse enable
LED 3 (green)
Status display for digital input REF LED REF (green)
Status display ready for operation LED RDY (green)
Status display positioning in operation LED POS (green)
Malfunction indication on the 1STEP
5V/204kHz
SF LED (red)
Diagnostic information Yes
Response Times
Update rate of the feedback interface 2 ms
Deletion of the start request until pulse
output
Response time DP master + response time ET 200S +
2 ms + 1 / (2* F
ss
)
To Next Page
Loading...
