Siemens SINAMICS PERFECT HARMONY GH180 - Options for Main Menu (5)

6.12 Options for Main Menu (5)
Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default con󹪝guration.
The Main Menu (5) consists of the following menu options:
• Motor Menu (1)
• Drive Menu (2)
• Stability Menu (3)
• Auto Menu (4)
• Log Control Menu (6)
• Drive Protect Menu (7)
• Meter Menu (8)
• Communications Menu (9)
• Security Edit Functions Menu (5000)
• Parameter Default/File Functions
• Language and Security Functions
Note
Description of menu options
The contents of menus 1 to 9 are explained consecutively in this chapter. Refer to the appropriate
section for descriptions of options within each menu.
You can access all of the menus directly using the keypad or from Main Menu (5). The following
󹪝gure depicts a typical menu selection from the main menu level, as viewed through the Drive
Tool.
Parameter Assignment/Addressing
6.12 Options for Main Menu (5)
NXGPro+ Control Manual
Operating Manual, A5E50491925A 149