Siemens SINAMICS PERFECT HARMONY GH180 - 6.2 Cabinet Anchoring Methods

3.2 Power Topology
SINAMICS Perfect Harmony™ drives contain individually controlled, interconnected power cells.
Each cell consists of a three-phase input and a single phase output, which are con󹪝gured in three
individual, concatenated strings of cells making up three output phases. Control and diagnostic
data is transmitted between the control and the cells on independent 󹪝ber optic channels.
Control Description
3.2 Power Topology
NXGPro+ Control Manual
34 Operating Manual, A5E50491925A