Siemens SINAMICS PERFECT HARMONY GH180 - ESD Protective Measures Diagrams Key

• Always place electrostatic endangered assemblies on conductive bases.
• Always store and transport electronic modules or components in conductive packaging (e.g.
metallized plastic or metal containers).
NOTICE
Use Conductive Packaging Material
Electronic modules must be stored, transported and dispatched in conductive packaging.
Electronic modules which are not correctly stored, transported or dispatched can be
damaged.
Pack electronic modules in appropriate conductive packaging (e.g. foam rubber or
aluminum foil).
The necessary ESD protective measures for electrostatic sensitive devices are illustrated in the
following drawings:
Figure 2-1 ESD Protective Measures
Table 2-1 ESD Protective Measures Diagrams Key
1 Sitting
2 Standing
3 Standing / Sitting
a Conductive Floor
b ESD Table
c ESD Footwear
d ESD Coat
e ESD Wrist Strap
f Cubicle Ground Connections
Safety notes
2.5 ESD-sensitive Components
NXGPro+ Control Manual
30 Operating Manual, A5E50491925A