Siemens SINAMICS PERFECT HARMONY GH180 - Menu Descriptions; Parameter Assignment;Addressing; PMM Control Menu; Table

Parameter Assignment/Addressing
6
6.1 Menu Descriptions
Note
Changing Drive Parameters
Only Siemens trained personnel are authorized to change drive parameters.
Familiarize yourself with the safety notes in Section Safety Notes for Parameter Changes and
preferentially contact Siemens customer service before changing the default con󹪝guration.
The following sections contain a description of parameter items available in the
Perfect Harmony menu structure. Table Menu and Submenu Summary lists main menus and
submenus of the system. Each menu and submenu is associated with an ID shown in the ID
column. Use the key sequence [SHIFT]+[⇒] followed by the ID number to directly access each
menu item. Use the four arrow keys to navigate through the menu tree.
Table 6-1 Menu and Submenu Summary
Menu ID Submenu Names ID Table Description
Motor Menu 1 Motor parameter 1000 Motor Parameter Menu Enter motor-speci󹪝c
data. These parame‐
ters provide per unit
ratings for most of the
output variables.
Current Pro󹪝le 1092 Current Pro󹪝le Menu
Limits 1120 Limits Menu
Auto-tune* 1250 Auto-tune Menu
Encoder 1280 Encoder Menu: CLVC only
Drive Menu 2 Drive parameter 2000 Drive Parameter Menu Con󹪝gure the VFD for
various load condi‐
tions and drive applica‐
tions.
PMM Control 2980 PMM Control Menu
Speed setup 2060 Speed Setup Menu
Torque reference 2210 Torque Reference Menu
Speed ramp setup 2260 Speed Ramp Setup Menu
Critical frequency 2340 Critical Frequency Menu
Spinning load 2420 Spinning Load Menu
Conditional time setup 2490 Conditional Timer Setup Menu
Cells 2520 Cell Menu
Sync transfer 2700 Synchronous Transfer Menu
External I/O 2800 External I/O Menu
Internal I/O 2805 Internal I/O Menu
Output connection 2900 Output Connection Menu
High starting torque 2960 High Starting Torque Menu
Watchdog 2970 Watchdog Menu
NXGPro+ Control Manual
Operating Manual, A5E50491925A 85