Siemens SINAMICS PERFECT HARMONY GH180 - Enter;Cancel Key

Note
Editing parameter values
When editing parameter values, you must use all four digit 󹪝elds by using a zero where
appropriate.
For example, to change the value of a four digit parameter from 1234 to 975, enter 0975.
Note
Signed parameters
For signed parameters, i.e. parameter values that can be either positive or negative, the 󹪝rst
active digit is the sign of the value.
To change the sign of a value:
• Use the up and down arrow keys. The active "digit" is the left most position and is underlined.
Either a "+" or a "-" is displayed during the editing process.
• Press [ENTER] to accept the new value.
When not being edited, positive values are displayed without the "+" sign. Negative values
always show the "-" sign unless the negative sign is implied in the parameter name itself.
9.1.8 Enter/Cancel Key
The [ENTER] key is located to the bottom left of the numeric keys.
Its function is similar to the [ENTER] key on a standard PC keyboard.
The [ENTER] key is used to choose or accept a selection or con󹪝rm an operation.
For example: after locating and displaying a parameter within the menu structure, use the
[ENTER] key to edit the parameter’s value.
Common functions of the [ENTER] key include:
• selecting a submenu
• entering edit mode for a selected parameter value
• accepting a new parameter value after editing
• initiating a function within the menu system
Use the [SHIFT] key with the [ENTER] key as a cancel function. The secondary function [CANCEL]
is listed on the lower portion of the [ENTER] key.
Common functions of the [CANCEL] key include:
• aborting the current operation
• returning to the previous menu display.
• rejecting any modi󹪝cations to a parameter value in edit mode.
Software user interface
9.1 SIMATIC Keypad
NXGPro+ Control Manual
348 Operating Manual, A5E50491925A