• Resetting the current security level to 0, by pressing
[SHIFT] + [⇐] + [SHIFT] + [⇐] + [SHIFT] + [⇐] from the default meter display.
• Setting a parameter value back to its factory default, by pressing [SHIFT] + [⇐], while in the
parameter edit function.
A summary of [SHIFT] key sequences is listed in Section Summary of Common [SHIFT] key
sequences.
9.1.10 Arrow Keys
There are four arrow keys on the keypad.
The up and down arrow keys [⇑] and [⇓] are located in the lower right corner of the keypad.
The left and right arrow keys [⇐] and [⇒] are located on the lower row of the keypad.
Common arrow key functions
• Navigating through the menu structure
• Scrolling through lists of parameters
• Incrementing or decrementing parameter values in edit mode.
• Manually advancing to the next digit in edit mode.
• Increasing and decreasing the desired velocity demand of the drive in local manual mode.
• Clearing security level by pressing [SHIFT] + [⇐] three times from the default meter display.
• Entering Numerical Menu Access mode with [SHIFT] + [⇒].
Using the Left and Right Arrow Keys
1. Use the left [⇐] and right [⇒] arrow keys to navigate through the menu structure of the
system.
2. Use the right arrow [⇒] to advance to a submenu structure or enter parameter edit mode.
3. Use the left arrow [⇐] to return to the previous menu.
Example: accessing the main menu
• From the default meter display, press the right arrow key [⇒] to access the main menu.
• [SHIFT] + [5] is a shortcut to the main menu.
Using the Up and Down Arrow Keys
Use the up [⇑] and down [⇓] arrow keys to scroll through lists of items.
Software user interface
9.1 SIMATIC Keypad
NXGPro+ Control Manual
350 Operating Manual, A5E50491925A
To Next Page
Loading...
