Entering a four digit security access code
Use the numeric keys to enter a four digit security access code. The security code consists of any
combination of digits 0 to 9 and hexadecimal digits A to F.
Note
Entering hexadecimal values
Hexadecimal (hex) is a method of representing numbers using digits 0 to 9, and letters A to F.
Press the [SHIFT] key followed by numbers [1] to [6] to enter hex digits A to F. The following table
lists the keystrokes required to enter hex values A to F and the decimal equivalents.
The hexadecimal entry feature is available only during security code entry.
Table 9-2 Hexadecimal digit assignments on the SIMATIC keypad
Key Combination Hex Value Decimal Equivalent
A
10
B
11
C
12
D
13
E
14
F
15
Accessing menus via the Speed Menu function
Use the numeric keys for the shortcut "Speed Menu" function. Use the Speed Menu function for
direct access to 10 basic menus. Each of the numeric keys has an associated menu name printed
at the top of each key.
Software user interface
9.1 SIMATIC Keypad
NXGPro+ Control Manual
346 Operating Manual, A5E50491925A
To Next Page
Loading...
