Siemens SINAMICS PERFECT HARMONY GH180 - Page 356

Key Combination Description

/2*6
6+,)7
Speed Menu to the Logs Menu. Access from the default meter display.
Enter hexadecimal "F" from value edit and security prompts.

'59352
6+,)7
Speed Menu to the Drive Protect Menu. Access from the default meter display.

0(7(5
6+,)7
Speed Menu to the Meter Menu. Access from the default meter display.

&200
6+,)7
Speed Menu to the Communications Menu. Access from the default meter display.

+(/3
6+,)7
Speed Menu to a context sensitive help menu. Access from anywhere except the default meter
display.
&$1&(/
6+,)7
(17(5
Cancel the current action, abort the current keystroke or exit the menu system.
Correct Use of SHIFT and ARROW Key Combinations
RU
Use individually to navigate through the menu structure.
In edit mode, use to change the cursor position in the edit 󹪝eld of a parameter value.
It automatically jumps over a decimal point or 󹪝eld delimiter.
RU
Use individually to scroll through lists of menu options, lists and parameters.
Use to change velocity demand from the default meter display.
In edit mode, increments/decrements digits under cursor and changes sign.
6+,)7
Enter Numerical Menu Access Mode.
You are then prompted to enter the 4 digit number for the associated menu or parameter.
6+,)7
Return to the top item of the currently selected menu, submenu or pick list.
6+,)7
6+,)7
6+,)7
Restore the security level back to 0.
Enter the [SHIFT] + [⇐] key sequence 3 times in succession from the default meter display to restore
the security level back to 0.
Software user interface
9.1 SIMATIC Keypad
NXGPro+ Control Manual
354 Operating Manual, A5E50491925A