6. Type in Security Code 7777 as indicated in the Security Code Change screen.The SIMATIC
KTP700 HMI Start Center is now displayed.
Figure 9-24 Start Center Screen
7. The display brightness setting is located under the Display menu. Note that this setting is
saved in non-volatile memory.
Figure 9-25 Display Menu Screen
To return to the NXG Control menu, cycle power to the SIMATIC KTP700 HMI and reboot it.
Software user interface
9.1 SIMATIC Keypad
NXGPro+ Control Manual
Operating Manual, A5E50491925A 365
To Next Page
Loading...
