Commissioning
9.9 STARTER start-up tool
9-107
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Fig. 9-10 Drive unit with one motor
If you want to create a second drive unit, in this case, for two motors, the drive unit will also
consist of a control unit and an Active Line Module (incoming supply), but this time of two
drives.
Fig. 9-11 shows the STARTER project navigator. In the same project (Project_Philosophy),
a second drive unit (Device_Unit_Two_Motors), which is designed for two drives, has been
configured.
Siemens Automation Parts
To Next Page
Loading...
