Siemens SINUMERIK 802D sl Instruction Manual

9.11 Diagnosis via STARTER
Commissioning
9-112
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
9.11.1 Function generator
Description
The function generator can be used, for example, to perform the following tasks:
S for measuring and optimizing closed-loop control circuits;
S for comparing the dynamic properties of coupled drives;
S for specifying a straightforward traversing profile without traversing program.
The function generator can be used to generate various signal forms.
The output signal can be supplied to the closed-loop control circuit via the BICO circuit in the
“Connector output” mode.
In the Servo mode, this setpoint can additionally be supplied into the control structure in
accordance with the currently selected mode, for example, as a current setpoint, disturbing
torque or speed setpoint. Any influence of overlaid closed-loop control circuits is suppressed
automatically.
Parameterizing and operating the function generator
The function generator is parameterized and operated via the STARTER parameterization
and commissioning tool.
Fig. 9-12 The “Function generator” start screen

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English