9.11 Diagnosis via STARTER
Commissioning
9-116
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Note
Please refer to the online help for more information about parameterizing and using the
measuring sockets.
Features
S Four recording channels per recorder
S Two independent trace recorders per control unit
S Triggering
– Without triggering (recording immediately after start)
– Triggering either to signal with edge or to level
– Trigger delay and pretrigger possible
S STARTER parameterization and commissioning tool
– Automatic or settable scaling of the display axes
– Signal measurement via cursor
S Settable trace cycle: integers of the base sample time
Parameterization
The “trace function” parameter screen is selected via the following icon in the toolbar of the
STARTER commissioning tool:
Fig. 9-17 STARTER icon for “trace function/ramp-function generator”
9.11.3 Measuring function (SERVO) (available soon)
Note
This functionality is available soon.
To Next Page
Loading...
