Siemens SINUMERIK 802D sl Instruction Manual

A.1 List of machine data
Machine and Setting Data 802D
A-196
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
A.1 List of machine data
A.1.1 Display machine data
Number MD identifier
Cross refe-
rence to the
relevant sec-
tion/chapter
in the Des-
cription of
Functions
Schematic view Name, miscellaneous Activation
Read/write
protection level
Unit Default value Minimum value Maximum value Data type
202 FIRST_LANGUAGE 19
decimal Foreground language POWER ON 2/3
0 2 1 2 BYTE
203 DISPLAY_RESOLUTION 19
decimal Display resolution immediately 2/3
0 3 0 5 BYTE
204 DISPLAY_RESOLUTION_INCH 19
decimal Display resolution immediately 2/3
0 4 0 5 BYTE
205 DISPLAY_RESOLUTION_SPINDLE 19
decimal Display resolution immediately 2/3
0 1 0 5 BYTE
208 USER_CLASS_WRITE_TOA_GEO
decimal Protection level write tool geometry immediately 3/3
0 3 0 7 BYTE
209 USER_CLASS_WRITE_TOA_WEAR
decimal Protection level write tool wear data immediately 3/3
0 3 0 7 BYTE
210 USER_CLASS_WRITE_ZOA
decimal Protection level for “Write settable work offset” immediately 3/3
0 3 0 7 BYTE
212 USER_CLASS_WRITE_SEA
decimal Protection level for “Write setting data” immediately 3/3
0 7 0 7 BYTE
213 USER_CLASS_READ_PROGRAM
decimal Protection level for “Read part program” immediately 3/3
0 7 0 7 BYTE
214 USER_CLASS_WRITE_PROGRAM
decimal Protection level for “Enter part program” immediately 3/3
0 3 0 7 BYTE
215 USER_CLASS_SELECT_PROGRAM
decimal Protection level for program selection immediately 3/3
0 3 0 7 BYTE

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English