Siemens SINUMERIK 802D sl - Operator Controls; Operator Controls and Displays

3-17
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Operator Controls and Displays
3.1 Operator controls
Use the horizontal and vertical softkeys to select defined functions. For a description of the
individual softkeys, please refer to the SINUMERIK 802D sl Programming and Operator’s
Guide.
References: /BP/, Programming and Operator’s Guide
Horizontal softkeys
Vertical softkeys
Fig. 3-1 CNC operator panel
3
Siemens Automation Parts