Siemens SINUMERIK 802D sl - Creating a Drive Project

10-123
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Creating a Drive Project
10.1 Creating a drive project OFFLINE
10.1.1 Creating a project
Creating a project
The first step is to create a new project for your example:
1. Click the STARTER icon or choose Start > Program > STARTER > STARTER from the
Windows Start menu to run the STARTER commissioning tool.
When the software is started for the first time, the main screen (see Fig. 10-1) appears
with the following dialog boxes:
– “STARTER Project Wizard”
– “STARTER Getting Started Commissioning Drive”
You can call up the Project
Wizard by choosing
Project > New with wizard.
If you deactivate this field,
the Project Wizard will not
appear any more when the
STARTER is started next
time.
Fig. 10-1 Main screen of the STARTER parameterization and commissioning tool
10
Siemens Automation Parts