Siemens SINUMERIK 802D sl Instruction Manual

10.1 Creating a drive project OFFLINE
Creating a Drive Project
10-124
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Note
If you deactivate the “Display wizard during start” field, the Project Wizard is not displayed
when you next start STARTER.
You can call up the Project Wizard by choosing Project > New with wizard.
Note
To deactivate the online help for “Getting started”, follow the instructions provided in Help.
You can call up the online help at any time by choosing “Help –> Getting started”.
STARTER features a detailed online help function.
2. Close the online help and follow the instructions provided by the Project Wizard
STARTER.
3. Select the Configure drive units offline button, as shown in Fig. 10-2.
Fig. 10-2 Project Wizard Starter
The wizard will guide you when creating a new project.
4. Enter the project name and, if required, a comment (see Fig. 10-3).

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English