Siemens SINUMERIK 802D sl - Completing the Start-Up

9.12 Completing the start-up
Commissioning
9-120
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
9.12 Completing the start-up
After the start-up by the machine manufacturer has been completed, it is recommended to
carry out a data backup prior to delivery to the end customer:
1. Performing an internal data backup (at least protection level 3 required):
– Select the Save data softkey in the System operating area.
– To save the drive mmachine data, set parameter p977=1 in the CU (SINAMICS_I).
2. Resetting the access level:
– Select the Delete passw. softkey.