Siemens SINUMERIK 802D sl - Connecting the Digital Inputs;Digital Outputs to the PP72;48 I;O Module

7.15 Connecting the digital inputs/digital outputs to the PP72/48 I/O module
Connecting
7-72
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
7.15 Connecting the digital inputs/digital outputs to the PP72/48
I/O module
You can use the I/O interfaces X111, X222, X333 as digital inputs or digital outputs. To this
end, fasten the insulation displacement connector to the ribbon cable and route it from the
I/O module to the terminal strip converter. The individual wiring can be performed on the ter-
minal strip connectors.
Remove the insulation from the cable end, insert the cable end (with end sleeve) into the
screw terminal connection and tighten the fastening screw.