D.2 General Terms and Conditions for the Use of Software for Sinumerik and Drive Technology
SINUMERIK 802D sl License Agreement
D-246
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
D.2.3 Software type
If the software type is specified neither in the Order Data, nor in the CoL, the Software shall
be subject to the rights specified in Point D.2.3, Clause 2 (Runtime Software).
1. Engineering Software
If the Licensee uses the Engineering Software to create his own programs or data which
contain parts of the Engineering Software, the Licensee shall have the license-free right
to make copies of these parts of the Engineering Software as a part of his own programs
or data, to use them or to deliver them third parties for their use. When delivering to third
parties, these must be bound in writing to the regulations of Point D.2.5, Clauses 1 and 2
in respect of the parts of the Engineering Software mentioned above.
2. Runtime Software
If the Licensee embeds the Runtime Software or parts thereof into his own programs or
data, the Licensee shall acquire a license in the Runtime Software according to the inten-
ded type of use in accordance with the Siemens Catalog valid at this time each time
when installing the Software or making copies, whichever is earlier. If the Licensee deli-
vers the programs or data mentioned above for use by third parties, these must be bound
in writing to the regulations of Point D.2.5 in respect of the embedded parts of the Run-
time Software. This does not affect the obligation for the Licensee to acquire a license in
the Runtime Software,if this software is to be copied in its original form.
If the Runtime Software contains tools for parameterization/configuration and if extended
rights are granted for these tools, this can be derived from the readme file of the Runtime
Software.
D.2.4 Upgrade and PowerPack
If it is to be understood from the Order Data or the CoL, for example through appending of
the suffix “PowerPack” or “Upgrade” to the name of the Software, that the Software serves
to upgrade another software (in the following referred to as “Original License”), the rights
granted to the Licensee in the Software are acquired also in respect of the original software
as soon as the original software is upgraded with the Upgrade/PowerPack. The rights of use
originally granted to the Licensee with the Original License are terminated with the upgrade.
The Licensee is however entitled to reverse the upgrade at any time (downgrading) – insofar
as this is technically feasible – and to exercise the rights of use in the software granted with
the Original License in accordance with Point D.2.1, Clause 5.
To Next Page
Loading...
Need help?
General
