10.3 Creating a drive project ONLINE
Creating a Drive Project
10-162
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
Select
Project > Save.
Fig. 10-64 Topology tree
10.In this window, check the topology and DRIVE-CLiQ connection and compare this with
the actual topology (see Fig. 10-64).
11.Choose Project > Save and save the project under the name “Project_1”.
To start the motor, continue with the steps described in Section 10.2.
To Next Page
Loading...
