Siemens SINUMERIK 802D sl Instruction Manual

A.1 List of machine data
Machine and Setting Data 802D
A-200
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
365 SPINDLE_LOAD_BAR_MAX
decimal Utilization display for the spindle, maximum immediately 2/2
120 0 120 Integer
366 SPINDLE_LOAD_BAR_COL1
decimal Utilization display color for the spindle, range 1 immediately 3/3
10 0 15 Byte
367 SPINDLE_LOAD_BAR_COL2
decimal Utilization display color for the spindle, range 2 immediately 3/3
9 0 15 Byte
368 SPINDLE_LOAD_BAR_COL3
decimal Utilization display color for the spindle, range 3 immediately 3/3
9 0 15 Byte
369 PROBE_MODE
decimal Measuring system type: 1: Probe, 2: Opt. measuring technique immediately 3/3
1 0 2 Integer
370 TOOL_REF_PROBE_AXIS1
decimal Absolute position of probe X immediately 2/2
0 –999999.999 999999.999 Double
371 TOOL_REF_PROBE_AXIS2
decimal Absolute position of probe Y immediately 2/2
0 –999999.999 999999.999 Double
372 TOOL_REF_PROBE_AXIS3
decimal Absolute position of probe Z immediately 2/2
9 –999999.999 999999.999 Double
373 MEAS_SAVE_POS_LENGTH2
decimal Activate tool gauging; select “Save Pos” softkey for all values immediately 2/2
0 0 1 Byte
374 TOOL_WEAR_LIMIT_VALUE
decimal Limit value for wear control during input immediately 2/2
9.999 0 9.999 Double
375 USER_CLASS_READ_CUS_DIR
decimal Protection level for “Read user cycles” immediately 2/3
0 7 0 7 Byte
376 USER_CLASS_WRITE_CUS_DIR
decimal Protection level for “Write user cycles” immediately 2/2
0 2 0 7 Byte
377 USER_CLASS_WRITE_TO_MON_DAT
decimal Protection level for “Tool monitoring” immediately 2/3
0 3 0 7 Byte
378 USER_CLASS_LADDER_VIEW
decimal Protection level for “Select user ladder view” immediately 2/2
0 2 0 7 Byte

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English