Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
200 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
; lpaatdl0.bmp, lpapt.bmp, lpaptd0.bmp, lpaptdl0.bmp, lpaap.bmp.
; Further you can define a extra column for bitmap exclusive
; display, which will not contain any other data.
; Example:
; [3_ActList]
; ShowActToolCol = 1
; column number where bitmap is displayed
; 1= NoData, 0, Activity
; column 1 is an empty column for display of channel activity;
; column with is 0 + "WidthOfActBitmapsInCharacters";
; column header text is "Activity" or language dependent text;
; File name of the bitmap for the current tool / DNo / DL,
; where D <> 0 and DL <> 0
; ActToolBitmap = paat.bmp
; File name of the bitmap for the current tool / DNo / DL,
; where D = 0 in magazine list and tool list.
; Such cutting edges are not marked in the working offset
; list.
ActToolZeroDBitmap = paatd0.bmp
; File name of the bitmap for the current tool / DNo / DL,
; with current DL = 0.
ActToolZeroDLBitmap = paatdl0.bmp
; as for ActToolBitmap for the programmed tool
ProgToolBitmap = papt.bmp
; as for ActToolZeroDBitmap for the programmed tool
ProgToolZeroDBitmap = paptd0.bmp
; as for ActToolZeroDBitmap for the programmed tool
ProgToolZeroDLBitmap = paptdl0.bmp
; File name of the bitmap for the current magazine location
ActPlaceBitmap = paap.bmp
; show whether the current magazine is free or locked for
; loading/unloading tools.
ShowMagFreeLocked = False
; ShowMagFreeLocked = True
; Name of the bitmap file to show whether the current magazine
; is free for loading/unloading tools.
MagFreeBitmap = magfree.bmp
; Name of the bitmap file to show whether the current magazine
; is locked for loading/unloading tools.
MagLockBitmap = maglock.bmp
; File name of bitmap used in lists to show: G56-reset-value =
; TOWMCS = G56-current-value
G56ResetTOWMCSEqualCurrBitmap = pemcs.bmp
; File name of bitmap used in lists to show: G56-reset-value =
; TOWMCS = G56-current-value
G56ResetTOWWCSEqualCurrBitmap = pewcs.bmp
; File name of bitmap used in lists to show: G56-reset-value =

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe