Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
213
[1_MagList]
MultiLine=SINGLE
NrOfFixedColumns=1
1= ToolInPlace, 3, ToolInPlace
2= TC_MPP4_1, 1, TC_MPP4_1
3= TC_MPP4_2, 1, TC_MPP4_2
4= TC_MPP4_3, 1, TC_MPP4_3
5= TC_MPP4_4, 1, TC_MPP4_4
6= TC_MPP4_5, 1, TC_MPP4_5
7= TC_MPP4_6, 1, TC_MPP4_6
8= TC_MPP4_7, 1, TC_MPP4_7
9= TC_MPP4_8, 1, TC_MPP4_8
10= TC_TP2, 11, TC_TP2
11= TC_TP1, 5, TC_TP1
12= TC_MPP6, 5, TC_MPP6
13= TC_TP3, 1, TC_TP3
14= TC_TP4, 1, TC_TP4
15= TC_TP5, 1, TC_TP5
16= TC_TP6, 1, TC_TP6
17= TC_TP7, 4, TC_TP7
18= TC_TP8_1, 1, TC_TP8_1
19= TC_TP8_2, 1, TC_TP8_2
20= TC_TP8_3, 1, TC_TP8_3
21= TC_TP8_4, 1, TC_TP8_4
22= TC_TP8_5, 1, TC_TP8_5
23= TC_TP8_6, 1, TC_TP8_6
24= TC_TP8_7, 1, TC_TP8_7
25= TC_TP8_8, 1, TC_TP8_8
26= NoData, 1, <automatic extend last column>
27= <EndOfList>
[2_MagList]
MultiLine=MULTI
NrOfFixedColumns=1
1= ToolInPlace, 3, ToolInPlace
2= TC_TP2, 11, TC_TP2
3= TC_TP1, 5, TC_TP1
4= TC_MPP6, 5, TC_MPP6
5= TC_TP7, 4, TC_TP7
6= CuttEdgeNo, 1, CuttEdgeNo
7= TC_DP1, 4, TC_DP1
8= TC_DP3, 11, TC_DP3
9= TC_DP6, 11, TC_DP6
10= TC_TP3, 1, TC_TP3
11= TC_TP4, 1, TC_TP4

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe