Siemens SINUMERIK Commissioning Manual

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
214 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
12= TC_TP5, 1, TC_TP5
13= TC_TP6, 1, TC_TP6
14= TC_MPP2, 4, TC_MPP2
15= TC_ADPT1, 11, TC_ADAPT1
16= TC_ADPT2, 11, TC_ADAPT2
17= TC_ADPT3, 11, TC_ADAPT3
18= TC_ADPT4, 4, TC_ADAPT4
19= <EndOfList>
[3_MagList]
NrOfFixedColumns=1
1= ToolInPlace, 3, ToolInPlace
2= TC_TP2, 11, TC_TP2
3= TC_TP1, 5, TC_MPP6
5= TC_TP9, 1, TC_TP9
6= TC_MOP1, 7, TC_MOP1
7= TC_MOP2, 7, TC_MOP2
8= TC_MOP3, 7, TC_MOP3
9= TC_MOP4, 7, TC_MOP4
10= TC_MPP3, 1, TC_MPP3
11= TC_MPP5, 2, TC_MPP5
12= NoData, 1, <automatic extend last column>
13= <EndOfList>
[1_ToolList]
NrOfFixedColumns=1
1= NO, 4, NO
2= MagNo, 4, MagNo
3= ToolInPlace, 3, ToolInPlace
4= TC_TP2, 11, TC_TP2
5= TC_TP1, 5, TC_TP1
6= TC_MPP6, 5, TC_MPP6
7= TC_TP3, 1, TC_TP3
8= TC_TP4, 1, TC_TP4
9= TC_TP5, 1, TC_TP5
10= TC_TP6, 1, TC_TP6
11= TC_TP8_1, 1, TC_TP8_1
12= TC_TP8_2, 1, TC_TP8_2
13= TC_TP8_3, 1 TC_TP8_3
14= TC_TP8_4, 1, TC_TP8_4
15= TC_TP8_5, 1, TC_TP8_5
16= TC_TP8_6, 1, TC_TP8_6
17= TC_TP8_7, 1, TC_TP8_7
18= TC_TP8_8, 1, TC_TP8_8
19= TC_TP7, 4, TC_TP7
20= NoData, 1, <automatic extend last column>

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe