Siemens SINUMERIK

Tool management
6.2 Settings in the configuration file
HMI Advanced (IM4)
224 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
; Width of a typical character
CharToGetColWidthPerCharacter= CharToGetColWidth
Language-dependent, see ...\language\patm_xx.ini
; Selection of the tool status bits which are displayed in the
; result list:
; ResultToolStatusColumnsEnable= 1111100100110000
; Bits 1 to 16, bit 1 is the least-significant bit in the tool
status and
; is positioned to the left in this character string in the header
; of the tool status column:
; If ResultToolStatusColumnsHeaderText and
; ResultToolStatusColumnsListText equals "<Empty>",
; the language-dependent values are in the batch list
; of pa_xx.dll.
ResultToolStatusColumnsHeaderText=<Empty> ;language-dependent
; ResultToolStatusColumnsHeaderText=ToolStatusColHeaderText
language-dependent
; Text in the data of the tool status column:
ResultToolStatusColumnsListText= <Empty> ;language-dependent/locale-
specific
; ResultToolStatusColumnsListText= ToolStatusColListText
language-dependent
; Column width for tool identifier
ResultDisplayedNumberOfToolnameCharacters=18
TimeMSecBetweenBatchOrders=1000
; Definitions of individual filters:
1_FindSoftkeyText = F1SK
; Language-specific; prewarning or disabled
1_FindResultHeadlineText = R1HL
; Language-specific; prewarning limit reached or disabled
1_FindCondition = TC_TP8 && 20
; Prewarning bit set (bit 5 of bit 1 to 16 (2 to the power of (5-
1)=16)+
; Disabled bit set (bit 3 (2 to the power of (3-1)=4)
1_FindResultAddColumnBtss = <empty>
1_FindResultAddColumnText = <empty> ; or R1AddCol ; language-
dependent
1_FindResultAddColumnDisplayedNumberOfCharacters=0
1_FindLimitedToCurMagazine=true
; "True", "False" (default); restricted to current magazine
; if called via magazine list.
1_ResultListType =0
0 = Standardliste (default setting), 1 = loading list
1_ReactivatePositioningMode = 2
; Positioning during Reactivate
; 0: Do not position,
; 1: Ask the operator whether to position,
; 2: Always position (default setting)
2_FindSoftkeyText = F2SK ; "disabled"