Siemens SINUMERIK Commissioning Manual

List of the INI Files
A.9 HEADER.INI
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
285
69=CondWait.bmp ; "Synchronism: Synchronous spindle"
70=CondWait.bmp ; "Synchronous spindle deactivation position"
71=CondWait.bmp ; "Waiting for enable of the transformer axis"
72=CondWait.bmp ; "Waiting because of possible collision"
73=CondWait.bmp ; "JOG: Position reached %2 %3 %4"
74=CondWait.bmp ; "JOG: Direction inhibited %2 %3 %4"
75=CondWait.bmp ; "Brake requirement %2 %3 %4"
76=CondWait.bmp ; "Wait: G4 S%1 still: %2 U"
77=CondWait.bmp : "Axial feed inhibit from PLC %2 %3 %4"
78=CondWait.bmp ; "Waiting for axial feed enable"
79=CondWait.bmp : "Axial feed inhibit from Synact %2 %3 %4"
80=CondWait.bmp ; "Waiting for master spindle speed %1"
81=CondWait.bmp ; "Waiting for parameter change %2 %3 %4"
82=CondWait.bmp ; "Waiting for end of motion %2 %3 %4 before transformation
change"
[Pos1]
ChanStatFeedStopSpindleStop = 1 ;channel status, channel 1 is
displayed, superimposed
Spindles=1,2 ;from feed inhibit channel 1 and spindle inhibit
;for spindles 1 and 2
[Pos3]
SpindStat=1 ;spindle status of spindle 1
;ChanStatFeedStop = 3 ;channel status, channel 3 is displayed,
superimposed
;from feed inhibit, channel 3
[Pos5]
ChanStat = 2 ;channel status, channel 2 is displayed
;SpindStat= 3 ;spindle status, spindle 3 is displayed
[Pos9]
ChanStatFeedStopSpindleStop = 1 ;channel status, channel 1 is
displayed, superimposed
Spindles=1 ;from feed inhibit channel 1 and spindle inhibit
;of Spindle 1
[Pos11]
ChanStatFeedStop = 2 ;channel status, channel 2 is displayed,
superimposed
;from feed inhibit, channel 2
[Pos13]
SpindStat=2 ;spindle status of spindle 2

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe