Siemens SIPART Series - Description of parameters

Parameterizing/addressing
9.3 Overview of parameters
SIPART PS2 with and without HART
156 Operating Instructions, 10/2013, A5E00074631-11
Parameter
Function
Parameter values
Unit
d4.FACT3
Factor 3
0.1 ... 10.0 ... 100.0
Overview parameter E
Parameter
Function
Parameter values
Unit
E. DEBA
Deadband monitoring with the following parameters:
E1.LEVL3
Threshold
0.1 ... 2.0 ... 10.0
%
Overview parameter F
Parameter
Function
Parameter values
Unit
F. ZERO
Zero point monitoring with the following parameters:
F1.LEVL1
Threshold 1
0.1 ... 1.0 ... 10.0
%
F2.LEVL2
Threshold 2
0.1 ... 2.0 ... 10.0
F3.LEVL3
Threshold 3
0.1 ... 4.0 ... 10.0
Overview parameter G
Parameter
Function
Parameter values
Unit
G. OPEN
Displacement of the upper stop with the following parameters:
G1.LEVL1
Threshold 1
0.1 ... 1.0 ... 10.0
%
G2.LEVL2
Threshold 2
0.1 ... 2.0 ... 10.0
G3.LEVL3
Threshold 3
0.1 ... 4.0 ... 10.0
Overview parameter H
Parameter
Function
Parameter values
Unit
H. TMIN
Monitoring of the lower limit temperature with the following parameters:
H1.TUNIT
Temperature unit
°C
°F
°C/°F
H2.LEVL1
Threshold 1
-40 ... -25 ... 90
-40 ... 194
H3.LEVL2
Threshold 2
-40 ... -30 ... 90
-40 ... 194
H4.LEVL3
Threshold 3
-40 ... 90
-40 ... 194