Siko AG25 User Manual

Service protocol
AG25, AG26 Date: 09.07.2018 Art. No. 88094 Mod. status 225/18 Page 106 of 109
9.6 Error number encoding
Faulty inputs are acknowledged with an error message. An error message is always prefixed by
a question mark, followed by a two-digit error code. The error message ends with a carriage
return "<CR>".
Code
Description
?01
Input of illegal parameter number
?02
Illegal value range:
?03
No operating authorization (active process data exchange with network master)
?04
Input disabled due to operating state
?05
Limit switch 1 active
?06
Limit switch 2 active
?07
Actual or target value > upper software limit
?08
Actual or target value < lower software limit
?09
Setpoint entered exceeds limiting value
?10
Fault
?11
Active EEPROM write access
?12
Actual or target value < lower area limit
?13
Actual or target value > upper area limit
?14
Operating voltage of control missing

Siko AG25 Specifications

General

Brand	Siko
Model	AG25
Category	Controller
Language	English