Siko AG25 User Manual

Warnings / Errors
AG25, AG26 Date: 09.07.2018 Art. No. 88094 Mod. status 225/18 Page 25 of 109
7 Warnings / Errors
7.1 Warnings
Warnings do not influence the operation of the actuator.
Warnings disappear after removing the cause.
Possible warnings:
 Battery voltage for absolute encoder is below the limit  exchange battery within the
next 6 months.
 Current limiting active
7.2 Errors
Errors cause an immediate stop of drive movement.
Errors are indicated via the drive status LEDs.
The error bit is set in the status word.
The error messages are entered in the error memory in the order of their detection. The last
10 error messages are displayed when the error memory is full.
The cause of error can be tracked down with the help of the error codes.

Siko AG25 Specifications

General

Brand	Siko
Model	AG25
Category	Controller
Language	English