Siko AG25 User Manual

General Information
AG25, AG26 Date: 09.07.2018 Art. No. 88094 Mod. status 225/18 Page 9 of 109
1 General Information
1.1 Documentation
The following documents are associated with this product:
 Product data sheet; describes the technical data, the dimensions, the pin assignment, the
accessories and the order key.
 Installation instructions, describe the mechanical and electrical installation with all safety-
relevant conditions and the associated technical specifications.
 User manual describing the migration of the actuator into an Industrial Ethernet network
and its commissioning.
These documents can also be found at http://www.siko-global.com/de-de/service-downloads.
“EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Deutschland”
2 Displays and operating elements
2.1 General Information
The drive has various LEDs that indicate the statuses of the drive and of the Ethernet module.
The operating elements are located below the cover.
2.2 Displays
Fig. 1: Displays

Siko AG25 Specifications

General

Brand	Siko
Model	AG25
Category	Controller
Language	English