Siko AG25 - Controller Parameter D; Device Information; Motor Current; Output Stage Temperature

Service protocol
AG25, AG26 Date: 09.07.2018 Art. No. 88094 Mod. status 225/18 Page 95 of 109
9.3.5.3 Controller Parameter D
Read command
G02
see chapter 9.8 ASCII command structure
Write command
H02xxxxx
Description
see chapter 8.2.1.20 Controller Parameter D
9.3.6 Device information
9.3.6.1 Motor Current
Read command
B04
see chapter 9.8 ASCII command structure
Write command
read-only
Description
see chapter 8.2.1.78 Motor Current
9.3.6.2 Output Stage Temperature
Read command
B00
see chapter 9.8 ASCII command structure
Write command
read-only
Description
see chapter 8.2.1.74 Output Stage Temperature
9.3.6.3 Voltage of Control
Read command
B01
see chapter 9.8 ASCII command structure
Write command
read-only
Description
see chapter 8.2.1.75 Voltage of Control
9.3.6.4 Voltage of Output Stage
Read command
B02
see chapter 9.8 ASCII command structure
Write command
read-only
Description
see chapter 8.2.1.76 Voltage of Output Stage
9.3.6.5 Voltage of Battery
Read command
B03
see chapter 9.8 ASCII command structure
Write command
read-only
Description
see chapter 8.2.1.77 Voltage of Battery