Siko AG25 - V-Inch

Service protocol
AG25, AG26 Date: 09.07.2018 Art. No. 88094 Mod. status 225/18 Page 92 of 109
9.3.2.6 V-Inch
Read command
G08
see chapter 9.8 ASCII command structure
Write command
H08xxxxx
Description
see chapter 8.2.1.26 V-Inch
9.3.2.7 Gear Ratio Denominator
Read command
G11
see chapter 9.8 ASCII command structure
Write command
H11xxxxx
Description
see chapter 8.2.1.29 Gear Ratio Denominator
9.3.2.8 Gear Ratio Numerator
Read command
G10
see chapter 9.8 ASCII command structure
Write command
H10xxxxx
Description
see chapter 8.2.1.28 Gear Ratio Numerator
9.3.3 Limiting values
9.3.3.1 Software Limit 1
Read command
E1
see chapter 9.8 ASCII command structure
Write command
F1±xxxxxxx
Description
see chapter 8.2.1.32 Software Limit 1
9.3.3.2 Software Limit 2
Read command
E2
see chapter 9.8 ASCII command structure
Write command
F2±xxxxxxx
Description
see chapter 8.2.1.33 Software Limit 2
9.3.3.3 Current Limiting
Read command
G24
see chapter 9.8 ASCII command structure
Write command
H24xxxxx
Description
see chapter 8.2.1.42 Current Limiting