Route properties
• Display waypoint name Toggle on/off to display the waypoint name.
• Display turning radius Toggle on/off to display the turning radius along with the WP
symbol.
• Display range/bearing Toggle on/off to display the range and bearing on the segments.
• Draw METOC layer
REMARK
In the case of the GC leg, several courses are provided at intervals along the leg to allow the
Navigator to closely follow the GC leg.
TURNING RADIUS
To activate the display toggle appropriate checkbox in the route / display panel. It is also
possible to change the turning radius of WP by clicking +/- hot keys when mouse cursor is on
top of waypoint.
RENAME THE WAYPOINTS
Re-numbers the waypoints after a waypoint has been added to or deleted from the route. The
bookmark Information allows entering additional information about the route.
INFORMATION TAB
This is an information panel.
LINK WITH OE FILE
Create a file with Object Editor tools including points, line, areas or text. Link the file with the
Route.
LOADING A ROUTE
When the route is loaded and activated the OE file linked with the route is automatically
displayed.
When the OE file is loaded with the route, all objects of the file are defined as user alarm. For
example if the ship enters an area defined in the OE file loaded with the route an entering
zone alarm is triggered.
142
To Next Page
Loading...
