VLAN C
ONFIGURATION
2-81
Web – Click VLAN, VLAN Static Table. Select a VLAN ID from the
scroll-down list. Modify the VLAN name and status if required.
Select the membership type by marking the appropriate radio
button in the list of ports or trunks. Click Apply.
CLI – The following example shows how to add tagged and
untagged ports to VLAN 2.
Console(config)#interface ethernet 1/1 3-92
Console(config-if)#switchport allowed vlan add 2 tagged 3-138
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport allowed vlan add 2 tagged
b_mgmt.book Page 81 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
