SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C ONFIGURING SNMP
2-111
IP address 192.168.1.1 and mask 255.255.255.255 — Specifies a
valid IP address of 192.168.1.1 only.
Note: IP filtering does not affect management access to the switch
using the Web interface or Telnet.
Command Attributes
• IP Filter List — Displays a list of the IP address/subnet mask
entries currently configured for SNMP access.
• IP address — Specifies a new IP address to add to the IP Filter
List.
• Subnet Mask — Specifies a single IP address or group of
addresses. If the IP is the address of a single management
station, the mask should be set to 255.255.255.255. Otherwise,
the IP address group is specified by the mask.
Note: The default setting is null, which allows all IP groups SNMP
access to the switch. If one IP address is configured, the IP
filtering is enabled and only addresses in the IP group will
have SNMP access.
b_mgmt.book Page 111 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English